24 40 Torque converter
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TORQUE CONVERTER (1 OF 2)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | M8 | 26 Nm | ||
| A4S 270R / A4S 310R / A5S 310Z / A5S 300J / A5S 440Z / A5S 560Z / A5S 325Z / A4S 200R / GA6HP26Z / GA6HP19Z | M10 8.8 | 45 Nm | ||
| A5S360/390R | M10 | 45 Nm | ||
| A5S360 / 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z / GA6L45R | M10 10.9 | 56 Nm |
TIGHTENING TORQUE SPECIFICATIONS - TORQUE CONVERTER (2 OF 2)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
56 Nm |
| GA8HP90Z / GA6HP26Z(AWD) | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| F30/F35 N20 GA8HP45Z | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| 2AZ Electrical machine to flywheel | GA8P70H | M10 | Replace hexagon nuts. (Remove adhesive residue from thread, if applicable) |
56 Nm |