LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2976 (Body Equipment - Special Tools) >> Body Equipment >> 51-3050 Tool

51-3050 Tool

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0492620 513050 Tool MW

NOTE: For fitting the filler strip in the rubber frame of the windscreen and rear window [Discontinued]

Storage Location

C2

Consisting of:

  1. = 0492621 Handle
    NOTE: [Discontinued]
  2. = 0492622 Pull-in eye
    NOTE: Model: 1502...2002tii [Discontinued]
  3. = 0492623 Pull-in eye
    NOTE: (Pull-in eye) model: 1800, 1800A, 2000, 2000A, 2000tilux, 2000tii [Discontinued]
    Fig 1: Identifying Tool (0492620)
    G04795745Courtesy of BMW OF NORTH AMERICA, INC.
  4. = 0492624 Pull-in eye
    NOTE: (Pull-in eye) model: 520, 525e [Discontinued]
  5. = 0492625 Hexagon socket
    NOTE: (Hexagon socket wrench) model: 728...733 [Discontinued]
  6. = 0492626 Hook
    NOTE: (Installer hook) For window rubber - model: all, except 728...733i) [Discontinued]
  7. = 0492627 Hook
    NOTE: (Installer hook) For window rubber - model: 728...733i [Discontinued]
  8. = 0492628 Pull-in eye
    NOTE: For windscreen filler strip - Model series: E30 [Discontinued]
  9. = 0492629 Pull-in eye
    NOTE: For filler strip - Model series: E28 / model year: after 83 [Discontinued]