33-5100 Spring tensioner

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0495682 335100 Spring tensioner Minimum set: Mechanical tools MW

NOTE: For tensioning or removing and installing barrel spring on rear axle. [Released]

SI number

01 01 07 (333)

Consisting of:

Fig 1: Identifying Spring Tensioner (0495682)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0495806 Spring cups
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495807 Spring cups
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495811 Spindle
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495812 nut
NOTE: (Nut with thrust piece) Discontinued, only available via complete tool [cannot be ordered individually]
= 0495813 Ring spanner
NOTE: (Ratchet ring spanner SW24) Discontinued, only available via complete tool [cannot be ordered individually]
= 0495816 Case
NOTE: (Case) Case with insert discontinued, can only be ordered using complete tool [cannot be ordered individually]