33-5040 Open-end wrench

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0495551 335040 Open-end wrench Minimum set: Mechanical tools MW

In conjunction with: 33 5 070

NOTE: Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive. [Released]

Storage Location

A18

SI number

01 21 06 (300)

Consisting of:

Fig 1: Identifying Open-End Wrench (0495551)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0495583 Pin
NOTE: (Pin with chain (2 pieces)) [Released]
2 = 0495582 Clip
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
1 = 0495581 Basic body
NOTE: [Released]