LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2971 (Rear Axle - Special Tools) >> Rear Axle >> 33-4120 Device

33-4120 Device

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0492388 334120 Device MW

NOTE: For removing and installing the ball joint in the wishbone [Discontinued]

SI number

01 01 89 (989)

Consisting of:

  1. = 0492389 Shaped element
    NOTE: For positioning when pressing out the ball joint [Discontinued]
  2. = 0492390 Bush
    NOTE: (Pressure bushing) For pressing the ball joint out of the wishbone [Discontinued]
  3. = 0492391 Shaped element
    NOTE: For positioning the wishbone when pressing in the ball joint [Discontinued]
  4. = 0492392 Bush
    NOTE: (Pressure bushing) For pressing the ball joint into the wishbone [Discontinued]
    Fig 1: Identifying Device (0492388)
    G06876290Courtesy of BMW OF NORTH AMERICA, INC.