33-3330 Device

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0492322 333330 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing ball joint and rubber mount in semi-trailing arm [released]

Storage Location

B14

SI number

01 10 90 (288)

Consisting of:

Fig 1: Identifying Device (0492322)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 0492323 Holding sleeve
NOTE: (Spacer sleeve) For pulling out/series: E36, E46 [released]
2 = 0492324 Holding sleeve
NOTE: (Extraction sleeve) Series: E36, E46 [released]
4 = 0492326 Holding sleeve
NOTE: (Spacer sleeve) For installing the ball joint, series: E31, E36, E38, E39, E46, E65, E66, E85 [released]
3 = 0492325 Spindle
NOTE: (Spindle with thrust nut) Replaced by 33 3 010 / 0 496 552 [replaced]