24-5490 Holding sleeve

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0491789 245490 Holding sleeve Minimum set: Mechanical tools MW

NOTE: (Sliding sleeve (5 pieces)) For prevention of damage to the radial sealing ring while sliding onto the gearshift shaft [Released]

SI number

01 02 95 (896)

Fig 1: Identifying Holding Sleeve (0491789)

Courtesy of BMW OF NORTH AMERICA, INC.