61 31 270 Removing and installing/replacing switch for reversing light (DME)
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary Preliminary Tasks:
- If necessary, remove rear underbody protection. Refer to 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .
Unfasten plug connection (1) and disconnect.
Release switch for reversing light (2).
Tightening torque, (18 N.m.).