61 31 079 Removing and installing/replacing switch for hazard warning system/central locking
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For Special Tool identification, see GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS - 5 - SERIES (E60) .
Special Tools Required:
- 64 1 020
Lever out switch for hazard warning system/central locking (1) with special tool 64 1 020 and pull back.
Disconnect associated plug connection and remove switch for hazard warning system/central locking (1).