LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Seats - Repair) >> Front Seat, Normal, Electric >> 52 14 ... Removing and installing outer upper rail trim with electric anchor fitting tensioner (from 04/2004)

52 14 ... Removing and installing outer upper rail trim with electric anchor fitting tensioner (from 04/2004)

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Driver's seat only: 

NOTE: Version with anchor fitting tensioner from 04/2004.

Lever trim (3) out of seat mechanism:

  1. Upwards,
  2. Slide towards rear,
  3. And feed out of anchor fitting tensioner.

Installation: 

Secure plug connection with felt strip against unlocking.

Lock on plug connection to anchor fitting tensioner can be unlocked when trim is fitted.

Fig 1: Removing Outer Upper Rail Trim
G00432840Courtesy of BMW OF NORTH AMERICA, INC.