LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 391 Replacing rubber mount on trunk lid support

51 24 391 Replacing rubber mount on trunk lid support

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Screw off both rubber buffers (1).

Installation: 

Adjust both rubber buffers (1) (work is described in 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) ).

Fig 1: Removing Rubber Buffers
G03270970Courtesy of BMW OF NORTH AMERICA, INC.