LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Body Equipment - Repair) >> Rear Bumper >> 51 12 826 Removing and installing/replacing guide for rear bumper

51 12 826 Removing and installing/replacing guide for rear bumper

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

If necessary, disconnect wiring harness for PDC.

Release screws (1) and remove guide (2).

Fig 1: Locating Retaining Screws For Guide
G03270750Courtesy of BMW OF NORTH AMERICA, INC.