21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 8.8 | Replace screws | 25 Nm |
| E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83/E85/E86/E87/E90/E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS screws | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85/S65 | Jointing torque Torque angle | 15 Nm 25 ° | ||
| N52/N53/N52K/M47T2/N45T/N54/N46T/N43/N45K/N47/M57T2/N47S/N62TU/N57 | M8 10.9 | Jointing torque Torque angle | 15 Nm 90° ± 5° |