34 11 Front Brake E60
WARNING: This page is about a different car, the 2007 BMW 550i, 2006 BMW 550i, 2005 BMW 545i, and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKE SPECIFICATIONS - E60
| Different thicknesses on brake linings | max. mm | 0.01 |
| Surface roughness of braking surfaces (precision-turned) | - | 0.5-3.5 |
| Brake disc diameter Models: 520i 525i 525d |
mm | 310 |
| Brake disc diameter Models: 530i 530d 630I |
mm | 324 |
| Brake disc diameter Models: 545i 535d 550 645Ci |
mm | 348 |
| Wear warning from residual lining thickness | mm | 3.0 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 520i 525i 525d |
mm | 22.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 530i 530d |
mm | 28.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 545i 550 645Ci 630I |
mm | 28.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 535d |
mm | 34.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | mm | 0.8 |