11 11 Engine Block, Cylinder Crankcase N62 B36
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATIONS - N62 B36
| Bore diameter stage 0 (1) | mm | 84.000 +0.014 | ||
| Bore diameter stage 1 (1) | mm | 84.250 +0.014 | ||
| Bore diameter stage 2 (1) | mm | 84.500 +0.014 | ||
| Permitted out-of-round of cylinder bore | mm | 0.007 | ||
| Permitted conicity of cylinder bore | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 | ||
|
||||