11 12 Cylinder Head with Cover N62
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER SPECIFICATIONS - N62
| Cylinder head height: Original dimension | mm | 133.0 +/- 0.07 |
| Machining limit | mm | 132.7 +/- 0.07 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Tilt clearance, maximum (wear between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 14.035-13.993 |