17 11 370 Removing and installing/replacing cooling loop for power steering: Recycling
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Catch and dispose of hydraulic fluid.
Observe country-specific waste-disposal regulations.
Unlock and disconnect left and right oil lines.
Release screw.
IMPORTANT:
Risk of damage to connecting pipes.
Carefully press cooling coil on left towards front, then clip out on right and remove.
Installation:
Bleed power steering.