LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2432 (Manual Transmission - Repair) >> 2311 Housing with cover >> 23 14 550 Removing/replacing zero gear sensor >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1) on zero gear sensor.

Unfasten screws (2).

Remove zero gear sensor.

Tightening torque 23 14 2AZ .

Fig 1: Identifying Plug Connection On Zero Gear Sensor And Screws
G05502400Courtesy of BMW OF NORTH AMERICA, INC.