23 11 Case and Cover
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE AND COVER
| |
Type |
Thread |
Tightening specification |
Measure |
| 16AZ Holder to transfer case |
265/Sport |
M6 |
|
9 Nm |
| 17AZ Retaining plates for bearings on housing |
S5D 310Z/S5D 320Z/S5D 200G/S5D 250G |
M6 |
|
10 Nm |
| 18AZ Retaining plate to housing |
S5D 320Z SMG |
M6 |
|
5.5 Nm |