23 11 Case and Cover
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE AND COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 11AZ Screw plug to rear housing section | B/C/D/E/F/G/H/I/7-speed SMG | M20 | 60 Nm | |
| B-transmission | M16 | 40 Nm | ||
| B/C-transmission | M22 | 60 Nm | ||
| 12AZ Sealing caps to rear housing section | B/C-transmission | M6 | 10 Nm | |
| 13AZ Reversing bolt to reversing lever | ZFS-5-16/C-transmission | 43 Nm | ||
| 14AZ Clamping claw to rear housing section | ZFS-5-16/C-transmission | 33 Nm | ||
| 15AZ Screws on detent plate | ZFS-5-16/C-transmission | 9 Nm |