23 11 Case and Cover
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE AND COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 6AZ Reverse gear shaft to case | B/C/D/E/F/G/H/I/7-speed SMG | M8 | 25 Nm | |
| S5D 310Z/S5D 320Z | M8 | 20 Nm | ||
| B/C/D/E/F/G/H/I/7-speed SMG | M10 | 45 Nm | ||
| 7AZ Support for reverse gear shaft | B/C-transmission | M8 | 25 Nm | |
| 8AZ Bearing holder to rear housing section | B/C-transmission | M6 | 10 Nm | |
| 9AZ Retaining tabs for sealing cap | C-transmission | M6 | 10 Nm | |
| 10AZ Bearing on countershaft | B-transmission | M10 | 90 Nm | |
| C-transmission | M10 | 30 Nm | ||
| C-transmission | M10 | 60 Nm |