23 11 Case and Cover
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CASE AND COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission housing, rear section/front section | B/C/D/E/F/G/H/I/7-speed SMG | 22 Nm | ||
| 2AZ Cover with guide tube/transmission case | B/C/D/E/F/G/H/I/7-speed SMG | M8 x 22 | 18 Nm | |
| B/C/D/E/F/G/H/I/7-speed SMG | M8 x 30 | 25 Nm | ||
| B/C/D/E/F/G/H/I/7-speed SMG | M6 | 10 Nm | ||
| 3AZ Bearing cap/sealing flange | B/C/D/E/F/G/H/I/7-speed SMG | 10.5 Nm | ||
| 4AZ Reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7-speed SMG | 49 Nm | ||
| 5AZ Retaining plate for reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7-speed SMG | 25 Nm | ||
| 6AZ Transmission closing plate | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 8 Nm |