17 22 Oil Cooler Pipes
WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL COOLER PIPES
| Type | Thread | Measure | |
|---|---|---|---|
| 5AZ Cap nut on transmission oil cooler (on radiator) and on transmission | All | M18 x 1.5 | 20 Nm |
| 5HP30 | M22 x 1.5 | 28 Nm | |
| 6AZ Oil lines on transmission | |||
| Hollow bolt | All | M16 x 1.5 | 37 Nm |
| 7AZ Oil lines on transmission oil cooler | A 5 S 300 J | 28 Nm | |
| Hollow bolt | All | M14 x 1.5 | 27 Nm |
| 8AZ Screw-in fitting on transmission | All | M14x1.5 und M16x1.5 |
37 Nm |
| 9AZ Oil hose on oil pipe | E23 | 28 Nm | |
| 10AZ Oil pipe bracket on radiator | E23 | 2 Nm | |
| 11AZ Oil pipe bracket on body | E23 | 6.5 Nm | |
| 12AZ Oil cooler on transmission | 5HP30 | 10 Nm | |
| 13AZ Transmission oil cooler line to transmission | N42 | M8 | 21 Nm |