0494410 233150 Tool Minimum set: Mechanical tools MW

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Tool set) For removing and installing the radial shaft seal of the drive shaft. Transmission: GS6-37BZ/DZ (H transmission)

Storage Location

B44

C44

SI number

01 10 02 (907)

Consisting of:

1 = 0494411 Puller

2 = 0494412 Mandrel

NOTE: (Drift)

Fig 1: Identifying Tool (233150)

Courtesy of BMW OF NORTH AMERICA, INC.