0491457 231000 Device MW

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For pressing the transmission housing and grooved ball bearing onto the transmission drive shaft and into the transmission housing

Storage Location

C15

C16

Consisting of:

1 = 0491458 Holding sleeve

2 = 0491459 Pin

NOTE: (Dowel pin (2 x))

3 = 0491460 Synchronizing key

NOTE: (Synchronizing key, long)

4 = 0491461 Synchronizing key

NOTE: (Synchronizing key, short)

5 = 0491462 Handle

5 = 0491463 Pin

NOTE: (Dowel pins for Getrag transmission)

Fig 1: Identifying Device (231000)

Courtesy of BMW OF NORTH AMERICA, INC.

7 = 0491464 Synchronizing key

NOTE: (Synchronizing key for Getrag transmission)