0491403 172010 Adapter Minimum set: Mechanical tools MW

WARNING: This page is about a different car, the 2010 BMW M6, 2009 BMW M6, 2008 BMW M6, 2007 BMW M6, and 2006 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Adapter kit) For rinsing the oil cooler in automatic transmissions.

SI number

01 12 96 (103)

Consisting of:

1 = 0493621 Plate

NOTE: (Mounting plate) For adapter 17 2 011 - Transmission: A5S 325Z

Fig 1: Identifying Adapter (172010)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 0491404 Adapter

NOTE: For connecting the oil cooler lines to the oil dispenser unit - Transmission: A5S 310Z, A5S 560Z, A5S 325Z

2 = 0491405 Adapter

NOTE: (Adapter (2 pieces)) For connecting the oil cooler lines to the oil dispenser unit - Transmission: A4S 310R

3 = 0491406 Screw

NOTE: (Banjo bolt (2 pieces)) Thread M18x1.5 with nut and gasket for connecting the oil cooler lines to the oil dispenser unit - \Transmission: A5S 440Z

4 = 0491407 Screw

NOTE: (Banjo bolt (2 pieces)) Thread M16x1.5 with nut, gasket and thread piece for connecting the oil cooler lines to the oil dispenser unit - transmission: A5S 300J

5 = 0491408 Connector

NOTE: For the oil dispenser unit from Tecalemit

6 = 0491409 Connector

NOTE: For the oil dispenser unit from Horn

7 = 0491410 Adapter

NOTE: (Clutch) Scope: 2 pcs.

8 = 0491411 Hose

NOTE: (Hose, long)

9 = 0491412 Hose

NOTE: (Hose, short)