0490482 007500 Extractor MW

WARNING: This page is about a different car, the 2010 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Universal extractor Kukko 17/K) For pulling bearing inner race from drive flange on wheel bearing, rear

Consisting of:

1 = 0490483 Spindle

NOTE: (Pressure spindle with bridge)

2 = 0490484 Spindle

NOTE: (Adjusting spindle (2 pieces) with knurled nuts (4 pieces))

3 = 0490485 Spindle

NOTE: (Pressure spindle, side)

4 = 0490486 Retaining bracket

NOTE: (Adjusting jaws (2 pieces))

5 = 0490487 Bolt

NOTE: (Adjusting screws (2 pieces) with nut) For adjusting jaw (2 pieces)

6 = 0490488 Extension

NOTE: (Extension (2 pieces))

7 = 0490489 Bridge

Fig 1: Identifying Extractor (007500)

Courtesy of BMW OF NORTH AMERICA, INC.