64 11 991 Removing and installing/replacing sensor for automatic recirculated air control

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, and 2008 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Unfasten plug connection (1) and disconnect.

Feed out sensor for automatic recirculated air control (2) in direction of arrow and remove.

Installation: Make sure sensor for automatic recirculated air control (2) is correctly seated.

Fig 1: Identifying Plug Connection And Automatic Sensor Recirculated Air Control

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Feed out sensor for automatic recirculated air control (2) in direction of arrow and remove.

Installation:

Make sure sensor for automatic recirculated air control (2) is correctly seated.

Fig 1: Identifying Sensor For Automatic Recirculated Air Control

Courtesy of BMW OF NORTH AMERICA, INC.