33 52 Shock Absorbers
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
SHOCK ABSORBERS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Nut and locknut/self-locking nut | E70, E71 | M10 | Replace nuts | 56 Nm |
| 2AZ Support bearing flange to shock absorber | E70, E71 | M12 | Replace nut | 48 Nm |
| 3AZ Shock absorber to swinging arm | E70, E71 | M14 | Replace screw TIGHTEN IN NORMAL POSITION |
165 Nm |