17 00 Coolant
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
COOLANT-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hose clamps to coolant hoses 32... 48 mm dia. | All | 2.5 Nm | ||
| 2AZ | Bleed screw (WAF 8) to thermostat housing | All, without E46 | 8 Nm | ||
| Plastic bleed screws to coolant lines | E46 | 2 -0.5/+1 Nm | |||
| 3AZ | Level switch (WAF 30) to coolant expansion tank | All | 3 Nm | ||
| 4AZ | Bleed screw to water valve or auxiliary water pump | E90/E91 | 3.5 Nm | ||