13 51 Injection pump, control
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
INJECTION PUMP, CONTROL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure fuel pump to cylinder head cover | N63 | M6 | Replace screws. Tighten screws in 180° increments uniformly until final tightening. Observe repair instruction. See 13 51 065 REMOVING AND INSTALLING/REPLACING LEFT HIGH-PRESSURE FUEL PUMP (N63) and 13 51 070 REMOVING AND INSTALLING/REPLACING RIGHT HIGH-PRESSURE FUEL PUMP (N63) . |
12 Nm |