13 11 Carburetor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
CARBURETOR - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Carburetor to intake manifold | M10/M20/M30 | 10 Nm | ||
| 2AZ | Carburetor to insulating flange | M10/M20/M30 | 10 Nm | ||
| 3AZ | Insulating flange to intake manifold | M10/M20/M30 | 10 Nm | ||
| 4AZ | Idling shut off valve; max. | M10/M20/M30 | 5 Nm | ||
| 5AZ | Flow valve; max. | M10/M20/M30 | 28 Nm | ||
| 6AZ | Throttle valve assembly to float housing; max. | M10/M20/M30 | 9 Nm | ||
| 8AZ | Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ | Warm-up regulator to engine | M10/M20/M30 | 23 Nm | ||