12 90 Control Unit Housing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL UNIT HOUSING-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Assembly of upper and lower sections | E32/E34/E36 | 5 Nm | ||
| 2AZ | Center section to body | E32/E34 | 3 Nm | ||
| 3AZ | Control unit holder in E box | E36 | 5 Nm | ||
| 4AZ | Control unit box cover | E38/E39/E52 | 4 Nm | ||
| E46 | 6 Nm | ||||
| E53/E36/7/E54 | 3 Nm | ||||
| 5AZ | Electronics box to firewall | E65 | Plastic screw | 6 Nm | |