11 23 Vibration Damper
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
VIBRATION DAMPER-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Hub to crankshaft (head surface oiled) | N63 | M18x1.5 | Replace screw | |
| 1. Jointing torque | 100 Nm | ||||
| 2. Angle of rotation | 60 ° | ||||
| 3. Angle of rotation | 60 ° | ||||
| 4. Angle of rotation | 60 ° | ||||
VIBRATION DAMPER-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 3AZ | Belt pulley/vibration damper to hub | S38/B36 | M8 10.9 | 34 Nm | |
| N40/N42/N45/N46/S38/B38 | M8 10.9 | 34 Nm | |||
| All/others | M8 | 22 Nm | |||
| 4AZ | Belt pulley to vibration damper | S38/B35 | M8 8.8 | 22 Nm | |
| S50 | M8 8.8 | 22 Nm | |||
| 5AZ | Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| M42/M43/M43TU/M44 | M16 x 1.5 | Replace screw | 330 Nm | ||
| 6AZ | Hub to crankshaft | N40/N42/N45/N46 | M16 x 1.5 | Replace screw | 300 Nm |