11 65 Turbocharger And Control
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TURBOCHARGER AND CONTROL-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to turbocharger (D80 V-band clamp). | N63 | M8 | Replace V-band clamp | 20 Nm |
| 2AZ | Turbocharger to primary catalyst (D108 V-band clamp). | N63 | M8 | Replace V-band clamp | 20 Nm |
| 3AZ | Heat shield | N63 | M6 x 12 | 10 Nm | |
| 4AZ | Heat shield to crankcase, oil return cover or cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 5AZ | Heat shield to crankcase. | N63 | M6 x 22 | 10 Nm | |
| 6AZ | Vacuum reservoir to crankcase and cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 7AZ | Bracket, electropneumatic pressure converter, to cylinder head. | N63 | M6 x 18 | 10 Nm | |
| 8AZ | Hexagon nut (2 x) | N63 | BM6 | 10 Nm | |
| Electropneumatic pressure converter to bracket. | |||||