33 4 400 Puller fixture

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For removing inner wheel bearing races on rear axle

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, F02, RR1

SI number: 1 05 99(426)

Order number: 33 4 400

Puller fixture

Consisting of:

1 = 33 4 401 Basic body

2 = 33 4 402 Spindle

3 = 33 4 403 Wrench, large

4 = 33 4 404 Wrench, small

5 = 33 4 405 Clamping ring (45...51 mm)

6 = 33 4 406 Clamping ring (50...55 mm)

7 = 33 4 407 Clamping ring (55...61 mm)

NOTE: Model series: E67

8 = 33 4 408 Clamping ring

NOTE: Model series: F01, F02 See SI: 01 18 08 (482)

9 = 33 4 409 Thrust piece

NOTE: Model series: F01, F02 See SI: 01 18 08 (482)

Fig 1: Identify Special Tool (33 4 400)

Courtesy of BMW OF NORTH AMERICA, INC.