33 3 100 Set of tools

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

In conjunction with: 00 8 550

NOTE: For removing and installing rubber mount in rear axle carrier

Series: E23, E24, E28, E30, E31, E32, E34, E36, E70, E71, RR1

Storage location: B10

Order number: 33 3 100

Set of tools

Consisting of:

2 = 33 3 102 Molded disk

NOTE: For extracting - Model series: E28

3 = 33 3 103 Spindle for installing

NOTE: Model series: E28, E30, E31, E36, RR1

4 = 33 3 104 Nut with bearing

NOTE: Model series: E28, E30, E31, E34, E36, RR1

5 = 33 3 105 Molded disk

NOTE: For installing - Model series: E28

6 = 33 3 106 Molded disk

NOTE: For gripping during installation - Model series: E28

7 = 33 3 107 Spindle

NOTE: For extracting - Model series: E28, E30, E31, E36

Fig 1: Identify Special Tool (33 3 100)

Courtesy of BMW OF NORTH AMERICA, INC.