11 8 530 Removal and installation tool

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing sealing cap on vacuum pump.

Engine: N53, N54

SI number: 1 20 06 (299)

Order number: 11 8 530

Removal and installation tool

Consisting of:

1 = 11 8 531 Baseplate

Fig 1: Identify Special Tool (11 8 530)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 11 8 532 Pressure plate

3 = 11 8 533 Spindle (pressure plate)

4 = 11 8 534 Spindle (removal plate)

5 = 11 8 535 Set of M10 screws (N54)

6 = 11 8 536 Set of M11 screws incl. sleeve (N53)

7 = 11 8 537 Removal plate