LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2165 (Engine - Technical Data (N63)) >> Piston With Rings And Pin >> 11 25 Pistons With Rings And Pins N63 B44

11 25 Pistons With Rings And Pins N63 B44

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS WITH RINGS AND PINS - TECHNICAL DATA

Piston and pin are paired to each other - replace together only.    
Measuring point "A" (position) mm 10
Piston diameter at measuring point "A"    
Original (new dimension) mm 88.985+0.014-0.014
Repair stage (0.08) mm 89.065+0.014-0.014
Oversize (0.25) mm 89.235+0.014-0.014
Oversize (0.50) mm 89.485+0.014-0.014
Piston installation clearance (piston new) mm 0.000...0.034
Piston installation clearance (piston worn) mm 0.020...0.047
Permissible total wear tolerance between piston and cylinder
(engine operated)
mm 0.15


PISTONS WITH RINGS AND PINS - TECHNICAL DATA

1st groove
End clearance mm 0.15...0.30
Axial play mm 0.020...0.060
2nd groove
End clearance mm 0.30...0.50
Axial play mm 0.015...0.060
3rd groove
End clearance mm cannot be measured
Axial play mm cannot be measured