LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2160 (Lights - Tightening Torques) >> Rear Light Cluster >> 63 21 Rear Light Unit

63 21 Rear Light Unit

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
REAR LIGHT UNIT - TORQUES SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Retaining nuts, rear light E60/E61/E85/E86/E90/E91/E92/E93 - See LIGHTS - REPAIR INSTRUCTIONS 2.5 Nm
- E63/E64/E70/E71 - - 2.5 Nm
- E81/E82/E87/E88 - See LIGHTS - REPAIR INSTRUCTIONS 2.8 Nm
- E83 - See LIGHTS - REPAIR INSTRUCTIONS 4.0 Nm ± 0.5 Nm
2AZ Retaining screws, rear light E63/E64 - - 1.5 Nm
3AZ Retaining clip (clamping claw), rear light E92/E93 - - 4.0 Nm
- E70/E71 - - 2.5 Nm
4AZ Auxiliary brake light to carrier E81/E87 - - 2.3 Nm
5AZ Additional brake light to rear spoiler E83 - - 2.5 Nm ± 0.5 Nm