LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2154 (Body Panel System - Tightening Torques (E88)) >> Side Panels >> 41 35 Side Panels

41 35 Side Panels

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
SIDE PANELS SPECIFICATIONS TABLE

- Type Thread Tightening specification Measure
1AZ Front side panel to body E63/E64 M6 x 22 10.9 - 12 Nm
- E83 ST6.3x14 - 7 Nm
- E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93 M6 - 7.6 Nm
- E89 M6 - 8 Nm
2AZ Front side panel to body E63/E64 M6 nut - 5 Nm
- E60/E61 M6 nut - 7.6 Nm
- E89 M6 nut - 8 Nm
3AZ Front side panel to body E60/E61 Sheet metal screw ST4.8x19 - 7.6 Nm
4AZ Combination holder, side panel, front, to body E81/E82/E87/E88/E92 M6 - 7.6 Nm
5AZ Side panel, rear, to body E85/E86 M6 - 7.6 Nm
6AZ Side panel, front, to module carrier/bumper carrier E70/E71 M6x16 - 8 Nm
7AZ Front side panel to body Area, A-pillar E70/E71 M6x16 - 6 Nm
8AZ Front side panel to body Area, sill E70/E71 Sheet metal screw ST4.8x19 - 2.5 Nm
9AZ Front side panel to body Area, cowl panel E70/E71 M5x20 - 2.5 Nm
10AZ Module carrier, top, to support carrier E70/E71 M6x26 - 8 Nm
11AZ Module carrier, bottom, to engine carrier E70/E71 M6 nut - 8 Nm