33 21 Output Shaft
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Output shaft to rear differential drive flange (Torx screw with ribbed teeth ) |
E81, E82, E87, E90, E91, E92, E93 | M8 | Replace screws | 52 Nm |
| - | E81, E82, E87, E88, E90, E91, E92, E93 | M10 ZNS3 | Replace screws | 70 Nm |
| - | E87 | M10 ZNS | Replace screws | 80 Nm |
| - | E90/S65, E92/S65, E93/S65 | M12 | Replace screws | 120 Nm |