LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2149 (Rear Axle - Tightening Torques) >> Final Drive Mounting >> 33 17 Rear Axle Differential Mountings

33 17 Rear Axle Differential Mountings

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
REAR AXLE DIFFERENTIAL MOUNTINGS - TORQUES SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Rear differential (if nec. with bracket for vibration damper) to rear axle carrier E81, E82, E87, E88, E90, E91, E92, E93 M12 (front) Observe repair instruction. 100 Nm
- E81, E82, E87, E88, E90, E91, E92, E93 M14 (rear) Observe repair instruction.
Replace nut
165 Nm
2AZ Vibration damper to bolt connection, rear differential E81, E82, E87, E88, E90/Except S65, E91, E92/Except S65, E93 M12 - 68 Nm
3AZ Vibration damper on bracket E81, E82, E87, E88, E90/Except S65, E91, E92/Except S65, E93 M12 - 68 Nm