LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2147 (Front Axle - Tightening Torques) >> Stabilizer Bar >> 31 35 Stabilizer Bar

31 35 Stabilizer Bar

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
STABILIZER BAR - TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Retaining bar for stabilizer to front axle carrier E81, E82, E87, E88, E90/REAR END, E91/REAR END, E92/REAR END, E93 M8 Replace nuts 21 Nm
  E90/Four Wheel Drive, E91/Four Wheel Drive, E92/Four Wheel Drive M10 Replace nuts 60 Nm
2AZ Stabilizer link to stabilizer/spring strut shock absorber E81, E82, E87, E88, E90, E91, E92, E93 M10 Replace nut 58 Nm