23 11 Case And Cover
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
CASE AND COVER - TORQUE SPECIFICATIONS
| Type | Thread | Tightening Specification | |
|---|---|---|---|
| 1AZ Transmission housing, rear section/front section | B/C/D/E/F/G/H/I/7- speed SMG | 22 Nm | |
| 2AZ Cover with guide tube/transmission case | B/C/D/E/F/G/H/I/7- speed SMG | M8 x 22 | 18 Nm |
| B/C/D/E/F/G/H/I/7- speed SMG | M8 x 30 | 25 Nm | |
| B/C/D/E/F/G/H/I/7- speed SMG | M6 | 10 Nm | |
| 3AZ Bearing cap/sealing flange | B/C/D/E/F/G/H/I/7- speed SMG | 10.5 Nm | |
| 4AZ Reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7- speed SMG | 49 Nm | |
| 5AZ Retaining plate for reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7- speed SMG | 25 Nm | |
| 6AZ Transmission closing plate | B/C/D/E/F/G/H/I/7- speed SMG | M6 | 8 Nm |