LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2136 (Engine Electrical System - Tightening Torques) >> Starter Lead >> 12 42 Wires To Starter

12 42 Wires To Starter

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
WIRES TO STARTER - TORQUES SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Battery positive terminal in/on distribution box E32/E34/E31/E36/E46/E87/E90/E85/E86/E81 M8 - 20 Nm
- E39/M57 M8 - 11 Nm
- E38/M67 M8 - 11 Nm
- E46/M47TU M8 - 11 Nm
- E60/N62 M8 - 15 Nm
- E65/N62/N73 M8 - 15 Nm
2AZ Wiring harness on distributor E36/M41 M8 - 10 Nm