12 52 Plug Connections, Terminals, Loose Parts
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52, N54 | M6x12 | - | 8 Nm |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | - |
| - | - | - | Jointing torque | 3 Nm |
| - | - | - | Torque angle | 45° |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52, N54, N52K, N51, N53 | M8 | Replace screws | - |
| - | - | Jointing torque | 8 Nm | |
| - | - | - | Torque angle | 45° |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |