11 61 Intake Manifold
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
INTAKE MANIFOLD SPECIFICATIONS
| Type | Thread | Tightening Specification | |
|---|---|---|---|
| 1AZ Hexagon screw (1 x) Air intake manifold to cylinder head. |
N54 | M7 x 50 | 15 Nm |
| 2AZ Hexagon nut (6 x) Air intake manifold to cylinder head. |
N54 | AM7 | 15 Nm |
| 3AZ Hose clamp (1 x) Gaiter, rear charge-air duct to front charge-air duct. |
N54 | L65-72 | 3 Nm |