67 33 510 Removing and installing/replacing servolock drive
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove trim for tail panel at top , see 51 46 050 REMOVING AND INSTALLING/REPLACING TOP TRIM ON TAIL PANEL .
Unfasten plug connection (1) and disconnect.
Turn plug housing (2) approx. 45° in direction of arrow and unclip.
Release screws (3) and remove servolock drive (4).
Installation: