66 53 020 Removing and installing/replacing reversing camera RFK (after 10/2009)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) , see 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove rear lid upper section panel , see 51 49 000 REMOVING AND INSTALLING/REPLACING PANEL FOR REAR LID .

Unlock holder (1) in direction of arrow. Remove reversing camera (2).

Replacement: Remove protective film from reversing camera lens.

Fig 1: Removing Reversing Camera

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect. Remove reversing camera (2).

Fig 2: Unfastening Reversing Camera From Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.